Master Installation Electrician x 2 | Transnet Vacancies

Master Installation Electrician x 2 | Transnet Vacancies

Transnet is inviting suitably qualified and experienced candidates to apply for two (2) Master Installation Electrician positions within Transnet Pipelines. The successful candidates will be responsible for overseeing electrical installations, conducting inspections, maintaining electrical equipment, ensuring compliance with safety standards and supporting the reliable operation of pipeline facilities.

Position Purpose

The Master Installation Electrician must be registered as a Master Installation Electrician in terms of Regulation 9 and approved by the Chief Inspector to verify and certify the construction, testing and inspection of electrical installations.

The role involves ensuring the efficient and effective custody, transfer and transportation of petroleum products in collaboration with the Operations, Instrumentation and Mechanical departments within Transnet Pipelines.

The successful candidate will also be responsible for electrical scheduling, inspections and maintaining safe working conditions.

Key Responsibilities

1. Management of Certificates of Compliance (COCs)

• Conduct periodic electrical inspections and issue Certificates of Compliance in accordance with National Codes and the Occupational Health and Safety Act.
• Conduct compulsory two-yearly OHS Act inspections of hazardous-area equipment.
• Maintain depot COCs and ensure electrical equipment located in hazardous areas complies with applicable standards.

2. Electrical Installation Oversight

• Provide technical guidance and oversee electrical installation activities.
• Ensure electrical installations are carried out according to applicable standards and safety requirements.

3. Equipment Integrity

• Ensure the correct selection, application and installation of electrical equipment within plant and operational facilities.
• Maintain the integrity and reliability of electrical equipment.

4. Preventative Maintenance

• Perform preventative maintenance on electrical equipment by identifying, repairing and reporting minor defects.
• Identify and report major defects to ensure reliable equipment operation and continuous pipeline operations.
• Maintain electrical equipment, including 220V–3.3kV motors, control gear and trip protection equipment such as actuators.

5. Defect Identification and Repairs

• Identify, analyse and repair defects on installed electrical equipment.
• Conduct diagnostic tests to identify faults and carry out the necessary repairs.
• Read and interpret electrical schematics and technical reports.
• Maintain and repair equipment such as mainline motor starters, trip protection systems, 380V panel starters and associated equipment.

6. Bonding

• Witness and carry out electrical bonding installations.

7. Removal and Replacement of Electrical Equipment

• Plan and execute the removal and replacement of installed electrical equipment.
• Arrange equipment isolation, removal, installation, energising and operational testing.
• Work with equipment such as main motors, actuators, lights, cranes, enclosures, isolators and stop/start stations.

8. Refurbishment and Modification of Electrical Equipment

• Refurbish electrical equipment by dismantling, replacing defective components, reassembling and testing equipment according to manufacturers’ specifications.
• Refurbish equipment such as starters and actuators.
• Certify all refurbished electrical equipment.

9. High-Voltage Equipment

• Obtain the necessary authorisation to perform switching and earthing operations on high-voltage switchgear and equipment up to 132kV.
• Issue work and test permits and conduct maintenance on high-voltage equipment.
• Supervise unauthorised personnel in substations and high-tension yards.
• Work according to the required clearances and Transnet’s High Voltage Electrical Safety Instructions.

10. Health and Safety

• Attend safety meetings and conduct safety inspections.
• Ensure the correct use of personal protective and safety equipment.
• Ensure electrical equipment complies with flameproof safety requirements and applicable standards.
• Assist with job observations and the supervision of personnel.

11. Administration

• Prepare and maintain defect and inspection reports.
• Obtain and cancel electrical hot work permits.
• Complete and manage job cards.
• Operate SAP modules, including Materials Management (MM) and Inventory Management (IM).
• Maintain records, registers and COCs in accordance with applicable legislation.
• Assist with internal electrical audits.
• Act as an Electrical Supervisor when required.

Qualifications and Experience

Essential Requirements

• Electrical Trade Test qualification.
• Three years of technical/electrical on-the-job experience.
• Adequate knowledge of electrical equipment used within Transnet Pipelines to work independently.
• Registered with the Department of Labour as a Master Installation Electrician.
• Completion of the required two-year on-the-job training and practical exposure, leading to final accreditation.
• Computer literacy, including Microsoft Word and Excel.
• Knowledge and practical experience in SAP Plant Maintenance, including MM and IM modules.
• Knowledge of purchasing and inventory management.
• High Voltage Safety Instructions (A-Brown) training.
• Code 8 driver’s licence.
• Valid Wireman’s Licence.
• Explosion Protection for Plant Maintenance Technicians (Electrical and Instrumentation).

Additional Training and Technical Experience

Candidates must have the required training, practical exposure and competency in the following areas:

• NOSA Safety Course.
• Fire Fighting.
• Oil Spill Management.
• First Aid Level 2.
• Rotork Actuator Training covering A-Range, IQT and IQ-Range.
• Electrical Motor Course.
• High-Tension Transformer Course.
• Working in Confined Spaces.
• Crossings and Cathodic Protection Basic Course.
• Operations Theory Course.
• Practical depot training and assessment until fully competent to work independently at the assigned depot or manifold.
• Knowledge of electrical testing instruments, including Megger and Thumper equipment.

The successful candidate must also attend refresher training every two years and undergo the required testing and recertification every two years.

Required Competencies

• Computer literacy.
• SAP Plant Maintenance (SAP_PM) literacy.
• Knowledge of applicable electrical tools and equipment.
• Knowledge of Code of Practice 29.
• Leadership and supervisory skills.
• Effective communication skills.
• Ability to work effectively as part of a team.
• Strong problem-solving abilities.
• Root cause analysis skills.
• Good interpersonal skills.
• Basic knowledge and practical application of the Occupational Health and Safety Act.

Employment Equity Statement

Preference will be given to suitably qualified applicants from designated groups in accordance with Transnet’s Employment Equity Plan and the employment equity targets of the organisation and relevant operating division.